Home

Defence Grade Products

POWERLINK OIL REFINERY LTD.  Uses of Defence Grade Products oil & Greases

SPECIFICATION CAN BE HAD ON REQUEST

SLProducts Identification/MaintenanceUses
1.Oil 10 W 30Engine oilRecommended for Naturally aspirated, supercharged and turbocharged diesel engines. High powered gasoline engines
Mixed fleet operation
2.Oil CF-4 15W40Engine oilRecommended for all types of diesel powered vehicles ranging from light commercial vehicles to heavy duty turbo charged diesel engines and also suitable for off-highway equipment and power generation sets operating on high speed diesel.     
3.Oil 20 W 40Engine oilFor use in Modern passenger cars
Naturally aspirated diesel engines operating under severe conditions.
Supercharged diesel engines Vehicles encountering continuous start-stop operation.
4.Oil 20 W 50Engine oilRecommended for Modern passenger cars Naturally aspirated diesel engines operating under severe conditions.
Supercharged diesel engines
Vehicles encountering continuous start-stop operation.
5.Oil 80W90Gear LubricantsSpecial multigrade heavy duty hypoid gear oils.  Primarily recommended for the lubrication of hypoid differential units operating under severe conditions and other types of mechanical transmissions and drive axles where extreme pressure gear oils are required.  It is ideal for vehicles operating in areas where ambient temperature vary widely.
6.Oil-C-600LUBRICATING OIL, GEAR, COMPOUNDEDfor use in vehicle transmissions , general gear applications and chassis lubrication operated over the product temperature range above O°C.
7.Gr.oil SAE 140Heavy Gear oilOil is  recommended differentials / axles of heavy commercial vehicles
8.Grease SG 240GreasesIt is recommended for wheel bearings and various other automotive grease applications which are not exposed to moisture. It meets IS:10647:1983.
9.Grease XG-279Grease, Automotive and ArtilleryGrease for use as a general purpose lubricant for automotive and artillery applications, over the temperature range minus 54°C to plus 105°C.
10.   Grease LG-280GreasesFor certain marine applications where the use of water-resistant grease is required as a lubricant and/or corrosion preventive. Also used for submarine stern tube shaft glands.
11.Grease Gem-3GreasesIt is an excellent multipurpose grease suitable for all automotive grease applications. It meets IS:12203:1987
12.Grease RR-3GreasesProvides Superior wear protection to the various parts of the joint such as the axis pin, ball hub, balls and ball  casin
13Radiator coolant     Cooling Fluid contains both water and coolant. The coolant portion consists of a green fluid that contains ethylene glycol 30% for more severe weather.
14.DAFC 50%Radiator coolantCooling Fluid contains both water and coolant. The coolant portion consists of a green fluid that contains ethylene glycol 50% for more severe weather.
15.Additive DieselAdditiveTo enhance fuel consumption capacity 
16.Anti Sieze ZX-13ANTI-SEIZE COMPOUND, GRAPHITEAnti seize compound for threaded fittings at temperatures up to 500°C. It may also be used where an electrical conductor is required. This product should not be used as an engineering lubricant.
17.CS SAE 30Engine oil and Brake oilApplications include maintenance equipment, tractors, lawn and garden equipment, generators, compactors, pumps, light towers, welders, log splitters, power washers, cement mixers and trowels, skid-steers, excavators and compressors
18.Corrosion PreventivePreventive chemicalsPrevention from heat, moisture effect
19.DAFC 60% IndigenousEngine Coolantcooling fluid  contains both water and coolant for heavy vehicle radiator
20.Gr.Ciatim-201Synthetic GreaseInstrument grease  is applied in friction and frictionless bearings, gear drives, aeromechanics control systems.
21.Grease XG 271General Purpose GreaseLong life general purpose bearing grease for aviation and shipping. Suitable for use in harsh environments from -40ºC to 140ºC
22.Grease XG 276Heavy MP Grease-75ºC to 120ºC). Recommended for use on heavily loaded sliding mechanisms, anti friction bearings and splinted shafts.
23.Grease XG 240Graphite GreaseIntended for use in highly loaded anti-friction bearings, gears, and actuators as well as instruments, high speed bearings (though not recommended for wheel bearings
24.Grease XG 287Multi Purpose GreaseMultipurpose grease for the lubrication of gearboxes, anti-friction bearings, plain bearings and other mechanisms over the temperature range minus 73 °C to plus 120°C, and where satisfactory performance in the presence of water contamination is required.
25.Grease XG 285Grease, Aircraft: GraphiteGraphite grease specifically for use as a lubricant in heavily loaded intermittent applications, such as aircraft combustion starter gears and slow moving plain bearings and sliding surfaces, over the operating temperature range minus 40°C to plus 120°C.
26.Grease XG 340Grease cum Preservative Used for lubrication of small arms and certain other equipment as well as for rust proofing.
27.HLP VG 32Hydraulic Oil HLP oils are recommended for high performance electro-hydraulic or numerically controlled systems.  These oils are extensively used as screw compressor oils also.
28.HLP VG 46Hydraulic Oil HLP oils are recommended for high performance electro-hydraulic or numerically controlled systems.  These oils are extensively used as screw compressor oils also.
29.HLP VG 68Hydraulic Oil HLP oils are recommended for high performance electro-hydraulic or numerically controlled systems.  These oils are extensively used as screw compressor oils also.
30.Oil C-70General Purpose OilOil use as an Hydraulic system
31.Oil Lube AxleAxle LubeHigh Viscosity Axle lube
32.Oil Mineral Hydro BufferHydraulic OilLow viscosity oil for special hydraulic purpose supercleen
33.Oil OEP 70Lube Oillubricant for highly loaded aircraft gears, pins, bushes and other mechanisms. The light grade is suitable over the temperature range minus 40°C to plus 110°C and the medium grade over the range minus 30°C to plus 120°C.
34.Oil OM-16Transformer OilFor Use as coolant media in Transformer, switchgear etc.
35Oil OM-21Plain Mineral OilFlushing Oil
36Oil OM-33Hydraulic Oil PetroleumThis standard specifies requirements for one grade of oil for use as a hydraulic fluid in HM Ships, machine tools, forklift trucks and certain fighting vehicles, and as a lubricant in certain gunnery and radar equipment,where the ambient temperature is not lower than minus 30 ºC.
37.Oil OM-58Oil Lubricating -CompressorIntended for use in certain air compressors, naval breech blocks and for miscellaneous lubrication of equipment in all ambient temperatures not lower than minus 18°C.
38.Oil OM-65Oil Lubricatinguse in four-stroke cycle certified aircraft reciprocating piston engines (except Porsche) and other aircraft radial
39.Oil OM-36Plain OilUse as Hydraulic System
40.Oil OM-100Oil GearLubricating oil for use in lightly loaded applications. Primarily for use on HM Ships, in forced lubrication systems and their associated gearing, in certain other marine gearboxes, for general mechanical lubrication and in certain hydraulic applications.
41.Oil OX-13LUBRICATING OIL, GENERAL PURPOSELUBRICATING OIL, GENERAL PURPOSE
42.Oil OX-52Oil containing preservativeUsed as lubricant preservative cum cleaning agent for small arms machine guns at medium and high temperature.
43.Oil OX-320LUB OILUsed as lubricant for slides and gradle guid ways, certain breech mechanisms and gum  Equipment.
44.Oil PX 16/SAE 30Preservative

General Preservative 

45PX-1Corrosion Preventive Corrosion Preventive Compound: Soft film, cold application
46.PX-2Corrosion PreventiveCorrosion Preventive Compound: Soft film, cold application
47.PX-6PreservativeExternal protection of torpedoes and preservation of various ordnance stores.
48.PX-7PreservativeProtection of battery terminals and certain torpedo mechanisms and spare parts.
49.PX-10PreservativeOil for preservation
50.SR RemovingSolution PasteAnti Rust & rust removing solution
51.Transmission Fluid F-10Automatic Transmission oilRecommended for vehicles for Drive Trains of vehicles manufactured by M/s. Force Motors Limited.   It is  primarily used for  the lubrication of hypoid differential units operating under severe conditions and other types of mechanical transmissions and drive axles where extreme pressure gear oils are required.
52.Transmission Fluid “A”Automatic Transmission oilRecommended for automatic transmissions and power steering units of automobiles and light trucks, where the manufacturer specifies Type A Suffix A fluid. It is also rec ommended for synchromesh gear boxes.
53.Transmission Fluid T-20Automatic Transmission oilTurbo Transmissions, torque convertors and fluid couplings manufactured by Voith Getreibe, West Germany. Hydraulic transmission systems and gears designed by Motoren UHD
54.URF PlainRecoiling FluidUse as coolant and recoiling Fluid in heavy mounted gun
55.URF 75:25Recoiling FluidUse as coolant and recoiling Fluid in heavy mounted gun
56.URF 80:20Recoiling FluidUse as coolant and recoiling Fluid in heavy mounted gun
57.Servo Ultra Servo Ultra oils are recommended for all classes of supercharged diesel engines of high speed, high output such as those in:Heavy duty diesel vehicles / Tractors Earth moving / Off-highway equipment Transmission systems of Caterpillar equipment Large generating sets
58.Oil OM-13Lubricating oil- General PurposeOil intended primarily for use as a general purpose hydraulic fluid and buffer oil under temperate and moderately cold conditions and also for the lubrication of lightly loaded mechanism.
59Oil OM-15Hydraulic oil- SupercleenHydraulic mechanisms in aircraft and other specified equipment operated over the temperature range of minus 54°C to plus 90°C in unpressurized systems and minus 54°C to plus 135°C in pressurized systems.